Dr 1X Repeater Setup Guide. Refer to the operating manual “setup mode screen” and example in. 144/430mhz 50w vhf/uhf ams digital repeater.
dr 1x repeater setup guide from fixenginejames123.z21.web.core.windows.net
Web provisioned for an external relay on logic output 2 to remotely reset. Web dr‐1x configuration and setup reference the dr‐1x operating manual to configure the following parameters. Web web provisioned for an external relay on logic output 2 to remotely reset the dr‐1x if needed.
There Are Two Parts Of The Install:
If your dr‐1x is on a mountain top, you need this. Web dr 1x repeater setup guide 144/430mhz 50w vhf/uhf ams digital repeater. Refer to the operating manual “setup mode screen” and example in.
Web Dr‐1X Configuration And Setup Reference The Dr‐1X Operating Manual To Configure.
Web web change the repeater mode to the hri mode. Web web provisioned for an external relay on logic output 2 to remotely reset the dr‐1x if needed. Web dr‐1x configuration and setup reference the dr‐1x operating manual to configure the following parameters.
Frequency Stability Plus/Minus 2.5 Ppm.
If version 1.10q is already installed, there is no need to. Web provisioned for an external relay on logic output 2 to remotely reset. 144/430mhz 50w vhf/uhf ams digital repeater.
Emission Type F1D, F2D, F3E, F7W.
Power setup 2 press and hold in the [ setup ] button while turning the repeater continue pressing the [. Web provisioned for an external relay on logic output 2 to remotely reset the dr‐1x if needed. Frequency range 144 to 148 mhz, 430 to 450 mhz.
